top of page

Now with reinforced Belted tires!

Traxxas X-Maxx 8S brushless monster truck RTR
With the renewed X-Maxx 8S, Traxxas takes a new step in the evolution of the rc hobby and equipped with a completely new designed chassis. The result is a giant monster truck with a length of no less than 75cm. With its four-wheel drive, it gets out of your way on almost every terrain. The X-Maxx 8S is built with the best materials, and is equipped with steel drive shafts. In addition, the electronics on this car are waterproof, so you are not dependent on the weather. You can use up to 2x 4S 14.8 V lipo batteries, a true beast. This truck has a huge power!

 

8S Extreme power
The Traxxas XMaxx 8S is a big sized race monster. On board is a huge Velineon 1600 XL Big Block brushless motor, which has a huge power. You can use up to 2x 4S 14,8V lipo batteries, which means that with a giant acceler
Speeds of around 80km/h will be achieved! By these speeds, driving with a monster truck will be more sensational than ever before.

 

Waterproof electronics
The electronics around this monster truck is waterproof. You don’t have to be afraid to drive through a pond. This way you can enjoy this Traxxas X-Maxx 8S at any time, and you are no longer dependent on the weather conditions.

 

Sustainability of the sustainability
The best materials are used in building this car. All rotating parts are illy-controlled, and the drive shafts are made of steel. The art or parts are also very strong because they are very flexible and therefore less likely to break down. The differential gears are also made of steel, and will therefore wear less quickly. The new 8S variant has also been reinforced where necessary compared to the previous 6S variant.

 

Traxxas Stability Management (TSM)
This system ensures that the car continues to drive in a straight track when a lot of gas is given. The best thing about this is that the car no longer breaks out unwanted. This is because the wheels are automatically corrected. If you prefer to drive without a TSM, that is no problem. The system can also be switched off.

 

Traxxas TQI 2.4GHz Transmitter Set
This station set operates at a frequency of 2.4GHz, which ensures that you have a large transmission range. You will also not suffer from interference with this transmitter. Even if you drive with several people you will not suffer from each other. This TQI transmitter set is bluetooth and telemetry prepared. However, the bluetooth module and telemetry sensors still need to be purchased separately if you want to use it.

 

Features of Traxxas X-Maxx 8S

 

  • Fully pre-assembled
  • Waterproof electronics
  • Strong Velineon 1600XL Big Block engine
  • Velineon VXL-8s controller
  • TSM (Traxxas Stability Management)
  • 2.4GHz TQI transmitter set
  • Telemetry possibilities
  • Self-Righting system
  • Very robust design
  • Durably built
  • Fully ilated bearing
  • Oil filled shock absorbers
  • Steel drive shafts
  • Four wheel driven
  • Steel differential gears
  • Quick change battery compartment
  • Body can be attached according to 1 locking point

 

 

Traxxas X-Maxx VXL-8S BELTED Edition

₹172,500.00Price
Color
Quantity
Item will be available within 45 days of pre order with full payment.
  • The specifications and specifications

    • Length: 758 mm
    • Width: 540mm
    • Height: 350 mm
    • Ground clearance: 102mm
    • Speed: +/- 80km/h

    Necessities of equipment

    • Batteries (maximum 2x 4S LiPo 29.6 volts total)
    • Battery charger
    • AA batteries 4 pieces for the transmitter

    You can equip this model with a Traxxas iD LiPo battery(s) that it will run longer and faster, for this you need a Traxxas iD LiPo charger to be able to charge it safely, the iD charger will automatically recognize the Traxxas iD LiPo battery and you do not have to set anything anymore, just press start!

    No more difficult setting options that are completely unnecessary.
    The Traxxas iD charger series also has a Storage (battery storage) mode which significantly extends the life of your batteries!
    You can also operate and read the -LIVE chargers with your Smartphone!

    Make sure LiPo mode on your model is activated:
    RED Led NiMh mode, and a GREEN LED LiPo mode.
    Switch between NiMh/LiPo mode is easy by turning on the model and holding the EZ-Set button for more than 10 seconds.
     

bottom of page